Home > New Propellers > Sterndrive Propellers > Volvo Penta Duo-Prop Propellers >
If you see the same product at a better price let us know and we will do our best to beat it.
Nettleprops.com
Volvo Duo Prop (F Series) Set
Item #:
F-SET
Availability: In Stock
Usually ships within 1-3 Business Days
Retail: $1,595.00
Price: $1,220.00
* Select Size: :
Update price
Volvo Penta Type "F" Duo-Prop Stainless Steel Propeller Set for Volvo Penta DPS Drives...
The stainless steel option for high performance gasoline and diesel engines with DPS drive. The material used gives the propeller blades greater torsional strength and is more resistant to cavitation damage.
 (Small).jpg)
From the Volvo manual:
Propeller replacement — DP-S
Removing the propeller
This procedure requires you to use a special tool, Volvo PentaP/N 3855516.
1. Ignition switch must be OFF.
2. Make sure the remote control is in FORWARD to lock
the propeller shaft.
3. Remove the rear propeller nut.
4. Remove the rear propeller.
5. Change the remote control position to REVERSE to lock
the propeller shaft.
6. Remove the front propeller nut.
7. Remove the front propeller.
8. Wipe the propeller shaft clean. Inspect for fishing line;
remove if present.
Installing the propeller
CAUTION!
Failure to install all components could result in loss
of the propeller and damage to the drive unit the
next time the boat is operated.
1. Ignition switch must be OFF.
2. Make sure the remote control is in FORWARD.
3. Coat the full length of the propeller shaft and the insideof the propeller hub with Volvo Penta propeller shaft grease P/N 828250. (Removal of the propeller will be difficult if this is not done.)
4. Install the front propeller.
5. Install the front propeller nut and tighten it to 45 ft. lb. (60N·m).
6. Shift the remote control into REVERSE to lock the propeller shaft.
7. Install the rear propeller.
8. Install the rear propeller nut and tighten it to 50 ft. lb. (70 N·m).
9. Shift the remote control into NEUTRAL. The propeller should turn freely.
|